How to Connect Soundcore Headphones: A Step-by-Step Guide

How to connect Soundcore headphones? Whether you’re a music enthusiast, a workout warrior, or someone on the go, our simple and effective instructions will ensure that you effortlessly link your Soundcore headphones to your preferred devices. Step into a world where superior sound meets effortless connectivity.

Let’s amplify your audio adventures with the unparalleled quality of Soundcore headphones!

Checking compatibility

Checking compatibility

Before you can connect your Soundcore headphones, it’s important to ensure that your device is compatible with them. Soundcore headphones are designed to work with a wide range of devices, including smartphones, tablets, and computers. However, it’s always a good idea to double-check.

Ensure your device is compatible with Soundcore headphones

To check if your device is compatible with Soundcore headphones, you can refer to the user manual or the product description of your device. Look for information about Bluetooth compatibility and make sure that your device supports Bluetooth connectivity.

Check the headphone model for compatibility

Soundcore offers a variety of headphone models, each with its own unique features and specifications. Before attempting to connect your headphones, make sure to check the user manual or the product description for compatibility information specific to your headphone model. This will ensure that you have the correct instructions for connecting your specific headphones.

Charging the headphones

Charging the headphones

Before you can start using your Soundcore headphones, you’ll need to make sure they are fully charged. Here’s how you can do it:

Connect the headphones to a power source

Using the provided charging cable, connect your Soundcore headphones to a power source. This can be a USB port on your computer, a wall adapter, or a power bank. Make sure the connection is secure.

Allow headphones to charge fully

Once connected to a power source, allow your Soundcore headphones to charge fully. The charging time may vary depending on the model, so refer to the user manual for specific information. While charging, you may notice a light indicator on the headphones that shows the charging status. Once the headphones are fully charged, the light indicator will typically turn off or change color.

Pairing the headphones

Pairing the headphones

Now that your Soundcore headphones are charged, it’s time to pair them with your device. Follow these steps to connect your headphones via Bluetooth:

Enable Bluetooth on your device

Go to the settings menu on your device and look for the Bluetooth option. Enable Bluetooth if it’s not already turned on. This will allow your device to search for and connect to nearby Bluetooth devices, including your Soundcore headphones.

Put the headphones in pairing mode

To put your Soundcore headphones in pairing mode, refer to the user manual for specific instructions. In most cases, you’ll need to press and hold a button on the headphones until you see a light indicator flashing or hear a voice prompt indicating that the headphones are in pairing mode.

Select the headphones from the list of available devices

On your device, you should see a list of available Bluetooth devices. Look for the name of your Soundcore headphones and select them from the list. Your device will then establish a connection with the headphones, and you should hear a confirmation sound or see a notification on your device indicating a successful pairing.

Troubleshooting common issues

Troubleshooting common issues

While connecting your Soundcore headphones is usually a straightforward process, you may encounter some common issues. Here are a few troubleshooting steps you can try:

Resetting the headphones

If you’re having trouble connecting your Soundcore headphones, try resetting them. Refer to the user manual for instructions on how to reset your specific headphone model. In most cases, you’ll need to press and hold a combination of buttons on the headphones for a few seconds until you see a light indicator or hear a voice prompt indicating a successful reset.

Updating firmware

Outdated firmware can sometimes cause connectivity issues. Check if there are any firmware updates available for your Soundcore headphones and follow the instructions provided by Soundcore to update the firmware. This can often resolve compatibility and connectivity issues.

Checking Bluetooth settings

If you’re still experiencing issues, double-check the Bluetooth settings on your device. Make sure Bluetooth is enabled and that your device is set to discoverable mode. You can also try forgetting the headphones from your device’s Bluetooth settings and then re-pairing them following the previous steps.

Using the headphones

Using the headphones

Now that your Soundcore headphones are successfully connected, you can start using them to enjoy your favorite music, podcasts, or videos. Here are a few tips on how to make the most out of your headphones:

Adjusting volume and playback controls

Most Soundcore headphones have built-in volume and playback controls. Familiarize yourself with the location and functionality of these controls. You can typically adjust the volume, play/pause, skip tracks, and answer calls directly from the headphones, without needing to touch your device.

Using additional features and functions

Soundcore headphones often come with additional features and functions that can enhance your listening experience. These may include noise cancellation, EQ settings, voice assistant integration, and more. Explore the user manual or the Soundcore app (if available) to discover and customize these features according to your preferences.



Connecting your Soundcore headphones is a simple process that involves checking compatibility, charging the headphones, pairing them with your device, and troubleshooting any issues that may arise. By following the steps outlined in this article, you’ll be able to enjoy your Soundcore headphones and all the benefits they have to offer. Remember to refer to the user manual for specific instructions related to your headphone model, and don’t hesitate to reach out to Soundcore’s customer support if you need further assistance.


  • Why is my Soundcore headphones not connecting?

    You can try the general troubleshooting steps and let us know if it works: 1) Upgrade the Soundcore App. 2) Forget the pairing record on your device and turn off the Bluetooth on your phone. 3) Reset the headphones.

  • How do I connect my Soundcore headphones to my iPhone?

    Generally, the pairing process is similar to any generic smartphone. First and foremost, turn on the Bluetooth device to pair earbuds to iPhone. And then, you need to go to the settings app and find connectivity. From there, click on the Bluetooth settings to set up earbuds on iPhone.

  • How do I put my Soundcore Q45 in pairing mode?

    How do you pair Anker Soundcore Space Q45? Hold down the power button to put the headset into pairing mode. Choose the headset in the Bluetooth menu on your phone when it shows up.

  • How do I connect my wireless headphones to my phone?

    1. First Open Settings.
    2. Next, tap Connections.
    3. Then tap Bluetooth.
    4. Then tap Scan at the top-right corner of your screen.
    5. Next, press and hold the power button on your headphones.
    6. Finally, find your headphones and tap them.

Originally posted 2023-08-08 12:14:59.

Leave a Comment